EP SeriesUltravioletSanitizer/ClarifierSystemINSTALLATION INSTRUCTIONSWARNINGFOR YOUR SAFETY — This product should be installed by a pro-fessional ser
7.6 Remove The Quartz Tube - First make sure the quartz tube is cool. Do not handle a quartz tube untilit cools. Grasp the quartz tube that is exten
9.3 Insert Bulb Into Quartz Tube - Slowly lower the bulb down into the quartz tube, until the bulb O’Rings aredown inside the quartz tube. Make sure
10.3 Electrical Enclosure Bonnet Removal - Follow Sec. 7.3 instructions to remove the electrical enclosurebonnet.10.4 Steps To Follow For Bulb Replace
unit wet tank. It is important to maintain a chemical regiment as directed by your pool chemical supplier, however youwill notice a dramatic decrease
17.2 Do I Need To Turn My EP Unit Off When I Clean My Filter? - No, the flow sensing pressure switchthat is part of your EP unit will automatically sh
increase the pressure inside the EP wet chamber. A low pressure 1/2 psi pressure switch (P/N 70-02315) is also available and can be installed in lie
b.Run your unit longer. If your unit is operating on a time clock, run the circulation pump longer toallow the EP unit to function fully.c.Clean the
17ELEKTRA® PRO UV LIMITED WARRANTYDelta Ultraviolet Corporation warrants to every original Purchaser of Delta UV’s Elektra® Pro Ultraviolet Unit, that
REFERENCE INFORMATIONDATE OF INSTALLATION _________________________________ MODEL ______________________RE-LAMP DATE _________________________ RE-LAMP
19- NOTES -
SAVE THESE INSTRUCTIONS2INSTRUCTIONS PERTAINING TORISK OF FIRE, ELECTRIC SHOCKOR INJURY TO PERSONWARNING — When using this unit, basic precautions sho
IMPORTANT SAFETY INSTRUCTIONSSAVE THESE INSTRUCTIONSP/N 94-35227 Rev. 1/04©2004 Delta Ultraviolet Corporation310-577-1840 PHONE310-305-9755 FAXCUSTOM
INSTALLATION INSTRUCTIONS WARNINGWhen using electrical products, basic precautions shouldalways be followed, including the following:1. DANGER: RISK O
8.0 Quartz Tube Installation8.1 Inserting Quartz Tube8.2 Seating Quartz Tube8.3 Sealing Gasket Installation8.4 Acorn Nut Installation8.5 Leak Checking
0.0 Forward: The Elektra® Pro UV Unit is designed for use in swimming pools, fountains, water features,waterfalls and fish ponds. It is not designed
3.0 Desired UV Unit Flow Rates – PondsNote: Multiple EP units can be used for flow rates beyond those specified herein. (See Sec. 17.7) - Do not exce
5.3 Installing Inlet/Outlet Unions - The EP unit comes with union nuts installed on the housing. Packedwith your EP unit are the remaining components
5.6 Gluing Piping To The UV Unit - The Inlet/Outlet PVC union tail pieces are 2 inch pipe size (63mm foroverseas models). Your PVC supply piping shoul
6.0 Start-Up - Once you have completed all steps above, including (IMPORTANT) verification that the unit has noleaks anywhere, including a possible br
Commentaires sur ces manuels