Electra EMD 100 Manuel d'utilisateur télécharger pdf (Page 3)

thermostat

power supply

“cold tail” cable

label

heating

cable

hermetically

sealed plug

connecting joint

between the power

supply conductor

and the heating cable

1 2 3 4 5

1

2

3

4

Multi-wire heating core

XLPE insulation

PET covered aluminum foil shield

Tinned copper braiding

Heat resistant PVC outher sheath

ELEKTRA VCD heating cable structure

®

2. ELEKTRA FreezeTec heating cables

are ready-made units of specified lengths,

consisting of a 12 W/m heat output cable,

terminated with a 1.5 m-long power supply

conductor with a sealed plug at one end,

and a thermostat at the other end.

The thermostat will automatically turn on the

system’s operation at +3°C and off at +10°C.

No additional controls are required

®

for the operation of ELEKTRA FreezeTec

heating cables.

These cables are especially designed for

the simple heating systems – with actuators

or pipes of max. 50 mm diameter.

The installation can be performed on

a DIY basis, an installer’s assistance

is not required.

5

®

ELEKTRA FreezeTec heating cable

3

1 2 3 4 5 6 7 8 ... 13 14

Commentaires sur ces manuels

Pas de commentaire